AmJohnny has shared an Instructable for bending PVC pipe, using a hair dryer and 1/2-inch drain auger. The drain auger is inserted into the PVC to prevent it from kinking as it's being bent ...

Note: Squeeze-style cutters are only capable of cutting PVC pipe with smaller diameters. For pipes 2 inches in diameter and ...

This will be the main body of your bird feeder. Next, cut the 1-inch PVC pipe into 2-inch pieces. These will serve as perches ...

4-inch PVC coupling pipe. 4-inch x 24-inch PVC pipe. This is the combustion chamber. 4-inch to 2-inch PVC reducer. 2-inch x 48-inch PVC pipe. This is the barrel. PVC cleaner and cement.

Glue: Assemble the piston by applying PVC glue [7] to one end of the 2-inch pipe you sawed off in step A and to one end of its 22-inch counterpart. Insert both glued ends into either end of the ...

Again, you can pick the pipe size right for you. We then used a 2C\,-inch drill bit to cut holes in the plywood to match the outside diameter of 2-inch PVC pipe. Ten minutes later, we had the top ...

And send a message to... the future. 3 1/2-inch-diameter PVC pipe, qty. 1 3 1/2-inch-diameter PVC test plug, qty. 1 3 1/2-inch-diameter PVC end cap, qty. 1 Container each, PVC primer and cement ...